Coin Cell Power Board
SKU:
$19.95
$19.95 - $159.95
per item
We made the Coin Cell Power board to make displays for our soldering kits at conventions, which we could power from a single USB battery bank. Now you can add fixed power to your CR2032 badges too! Also useful for badge makers to test your assembled badges.
Note: it is ONLY compatible with side-loading CR2032 battery holders like the one in the photo! It will not plug directly into top-loaders, though you can solder wires from the Coin Cell power board to their tabs.
Interested in a bulk purchase of 100 or more, or interested in bare boards? Contact us for pricing.
Note: it is ONLY compatible with side-loading CR2032 battery holders like the one in the photo! It will not plug directly into top-loaders, though you can solder wires from the Coin Cell power board to their tabs.
Interested in a bulk purchase of 100 or more, or interested in bare boards? Contact us for pricing.
Overview:
Plug in a 5V USB source at the USB-C connector, turn the top switch to ON, and select 5V or 3V power to your badge with the bottom switch. Plug the thicc Coin Cell Power board directly into the side-loading CR2032 holder on your badge! Each board comes with one JST PH cable so you can daisy-chain multiple Coin Cell Power boards and badges together.
Uses:
The Coin Cell Power is adaptable for a few different setups, here are full instructions!
PCBs fabricated by PCBWay
Plug in a 5V USB source at the USB-C connector, turn the top switch to ON, and select 5V or 3V power to your badge with the bottom switch. Plug the thicc Coin Cell Power board directly into the side-loading CR2032 holder on your badge! Each board comes with one JST PH cable so you can daisy-chain multiple Coin Cell Power boards and badges together.
Uses:
- Make a permanent display of your blinky badge by using a USB wall wart, and never have to change batteries again!
- Power multiple blinky badges daisy-chained together off of a single USB battery pack
- Are you a badge maker? Easily test your badges without having to fish a battery in and out every time.
The Coin Cell Power is adaptable for a few different setups, here are full instructions!
PCBs fabricated by PCBWay